镁质瓷泥浆流变性能的改进

滑石质瓷是一种高性能瓷的材料，但由于其泥浆的稠化性及泥料塑性差，阻碍了滑石质瓷的大量生产。实验表明：引入长石作助熔剂并加入适量粘土，可以改进泥料塑性及泥浆流变性能，使烧成变形度小，机械强度提高，能较好地满足制品成型的工艺要求。实验中设计了多组配料，分析比较烧后试样的性能测试结果，确定最佳配方及烧结温度。     

P油田长4+52小层孔隙度三维模型的建立

为了更准确的评价P油田主要产层长4 52小层的储集能力，以随机模拟建模方法对该层的孔隙度进行研究，建立孔隙度分布三维模型。研究表明，长4 52小层属于低孔储层，平均孔隙度为11．85％。根据P油田储层物性分类原则，该储层在本区分布较为广泛，是今后挖潜的重点。     

基于二维直方图分析的二元子图微光图像增强处理

提出了基于二维直方图分析的二元子图微光图像增强处理算法，根据原始图像的二维直方图分布特征，依据相邻像素的相关性数据，将图像分割成二元子图像，对每个子图像分别进行直方图均衡增强处理，最后合成得到完整的处理图像，通过用信息容量等图像评价参数对实验结果进行分析，表明此算法克服了对整幅图像进行直方图均衡时难以把握局部细节的缺点，得到了具有较好视觉质量的处理后微光图像。     

丙烯腈吸收塔放空管道噪声控制

某石油化工总厂丙烯腈车间的吸收塔在放空负荷增大以后产生了较严重的噪声,对生产环境造成极大污染。为对丙烯腈吸收塔的放空管道实施噪声控制,改善工厂以及周边厂家的生产环境,进行了噪声控制方案设计及消声器设计。项目实施后,噪声绝对值降低了20分贝,噪声幅度降低达24％。     

Epoxidation of high trans‐1,4‐polyisoprene and its properties

A new organic‐solvent‐free water‐phase suspension method was used to synthesize partially epoxidized high trans‐1,4‐polyisoprene (TPI) to improve its properties, including oil resistance and wet‐skid resistance. The epoxidation was conducted in an aqueous peracetic acid solution and on the TPI granules prepared by a bulk precipitation method with supported titanium catalyst. The effects of the synthesis conditions, including reaction temperature, reaction time, and pH value, on the epoxy content were investigated. Epoxidized trans‐1,4‐polyisoprene (ETPI) with epoxy contents between 10 and 80% were obtained within 4 h. Both the amorphous and crystalline regions of TPI were epoxidized. The crystallization properties decreased with increasing epoxy content. ETPIs possessed lower mechanical properties than TPI but could be enhanced by vulcanization. The oil resistance and wet‐skid resistance were significantly improved after epoxidation. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Accelerated wear testing with a microfabricated surface to evaluate the lubrication ability of biomolecules on polyethylene

Wear of ultrahigh‐molecular‐weight polyethylene (UHMWPE) and wear‐particle‐induced osteolysis and bone resorption are the major factors causing the failure of total joint replacements. It is feasible to improve the lubrication and reduce the wear of artificial joints. We need further understanding of the lubrication mechanism of the synovial fluid. The objective of this study is to evaluate the lubricating ability of three major components in the synovial fluid: albumin, globulin, and phospholipids. An accelerated wear testing procedure in which UHMWPE is rubbed against a microfabricated surface with controlled asperities has been developed to evaluate the lubrication behavior. An analysis of the wear particle dimensions and wear amount of the tests has provided insights for comparing their lubrication performance. It is concluded that the presence of biomolecules at the articulating interface may reduce friction. A higher concentration of a biological lubricant leads to a decrease in the wear particle width. In addition, in combination with the wear results and mechanical analysis, the roles of individual biomolecules contributing to friction and wear at the articulating interface are discussed. These results can help us to identify the role of the biomolecules in the boundary lubrication of artificial joints, and further development of lubricating additives for artificial joints may be feasible. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Flexural and Shear Rigidity of Composite Sheet Piles

The flexural and shear rigidity of pultruded composite sheet pile panels consisting of E-glass fiber-reinforced polyester are studied in this paper. The analysis consists of an experimental investigation and an analytical modeling to determine the resistance of the sheet pile panels to the deflections for design of composite sheet pile walls. Timoshenko’s beam theory was used to experimentally determine the flexural rigidity (EI) and shear rigidity (kAG) of the panel. Three- and four-point bending tests were performed on six different span lengths and the results were self-compared from the two independent tests. Analytical expressions for the flexural and shear rigidities were derived to allow the prediction based on the layered structure of pultruded shapes. The values computed from the analytical expressions were examined with the experimental results.     

数字聚焦微电阻率测井仪设计

提出了一种采用数字聚焦方法的微电阻率测井仪器设计方案，其主要特点利用DSP集成芯片的数字信号处理优势，实现仪器的控制与测量，并通过软件滤波和聚焦处理获得视电阻率。该设计用超大规模集成电路DSP及软件处理取代了老式微球形聚焦测井仪器复杂的硬件监控、反馈、检波和测量线路，提高了仪器的可靠性和测量精度。对仪器原理进行了较详细的说明，在DSP技术应用于测井井下仪器方面做了有益的探索。     

低压补偿滤波装置的应用分析

用实例对比了低压补偿滤波装置与传统的无功补偿装置对工业用户无功补偿的作用和安装，运行、维护情况，阐明了低压补偿滤波装置是一种兼顾了补偿和滤波功能，具有较高的技术性和经济性的无功补偿和谐波滤波装置。